We’ve just completed a total revamp of our CVDS production process. This Included locating and negotiating with a Brand New CNC Machining manufacturing Company, the aim is to put an end to the long component delays we’ve had to endure during the past twelve months.
Right now is probably one of the most attractive times ever to place your CVDS order – The current prices right now are the lowest we’ve ever been able to offer – And will only last for a short time – you might have to act soon if you want to secure one of our CVDS at a very affordable price.
The new high speed CNC production lathe and machining centre facility has enabled us to make this world class product even better, and now available at a much more affordable price.
Watch The Very Short Video Of The CNC Lathe In Action Below.
We currently Hold Excess stock Of:
- GKN Lobro CV Joints and Boots.
- The special custom designed CNC machined high tensile 7/16″ threaded studs.
- CNC machined and splined intermediate axle shafts.
- Our unique tri-shaped steel designer adapter plates.
- The myriad of other parts employed in our world class CVDS conversions.
Put some extra zing and enjoyment plus superior reliability into your elan driving experience.
Forget about those yucky unreliable rubber do-nuts.
CVDS Conversion = 100% Drive line reliability.
As a priority list subscriber, you have first option to place your order, and you’ve landed on the right page to continue.
Make use of your priority mail list member status to take advantage of the special advance notice before we go public, because as in the past, a rush of orders could mean that we temporarily close the order books, until new orders have been cleared.
You Can Secure Your elan CVDS Today – Scroll Down The Page To Locate The Correct Order Button For Your Country Or Region.
The photo below, a batch of CVDS export orders, taken early 2016, CVDS conversions assembled ready to pack and ship to elan owners across the globe, this was a continuing, repeat scenario throughout 2016 and into early 2017, and we’ve only just caught up with everything, and now ready to forge ahead with new orders.
CVDS 2016 Export Orders.
We Are Often Asked.
Do I need to put strap or cable limiters on the rear suspension when I fit a CVDS conversion to my elan?
The answer in short is NO.
To Understand Why – Click Here – The Page Will Open In New Browser Or Tab.
Australian customers, please contact us (Use the form below) for local AU$ price including GST and postage cost to your Aust Address.
The current attractive price for the CVDS conversion takes into consideration the following:
- Favourable currency exchange rates.
- Much revised component production methods.
- Revised and more competitive airfreight landing costs.
To place your order, the custom buttons for Pay Pal Secure Payment Gateway are located below, just make sure that you select the correct button for your country or region, enter your details, follow the prompts. (If you have any difficulties please contact us – see below).
Note: It is not essential to have a pay pal account to make your purchase.
The buttons are clearly labelled and indicate which button tab you should click to order.
International Orders Are Shipped Via Air Freight – The List Price Also Includes International Air Freight Shipping Cost To Your Country Or Region Destination.
Elan Plus Two Owners Please Note: When Ordering +2 elan CVDS – The +2 Elan and the elan CVDS carry identical prices. If you are ordering CVDS for the +2 Elan, please make sure to send a follow up email to confirm with us that you require CVDS for +2, failure to do so may mean the incorrect product will be shipped to you.
Use the contact form below.
Secure Your Order Today
Most Major Credit and Debit Cards Accepted Via the Pay Pal Safe and Secure Payment Gateway.
EU based customers, please NOTE: The following countries of Austria – Belgium – Denmark are now calculated under a different shipping zone, with the product price adjusted accordingly, we apologise for any cost difference between the UK and other EU countries, but unfortunately, we have no control over shipping rates, price variations reflect the difference in shipping costs to various destinations across the globe.
Make sure to use the correct button for your country below.
After you click the correct button for your region, you will land on the secure pay pal payment page, remember to click and select the country (top of pay pal page) you live in.
Australian Customers – Please Contact us For AU Price and Delivery Options .
Please Use the contact form below.
For many reasons during late 2015 and 2016 brought with it some very frustrating delays in sourcing splined intermediate half shafts and also to some extent the supply of GKN CV joints presented delivery problems which extended the time required to supply the conversions, naturally we want to avoid any delay, but as we all know, the best laid plans can go wrong.
But for now, we have excess stock of the important parts in order to reduce the turnaround times with your order.
Please do not ask for urgent order requests, all orders are assembled and shipped in the order they are received.
If a supply problem does arise, we will notify you to set a revised delivery date, we also ask that you remain patient while we complete your order, we fully understand that as a customer, delays can be frustrating, but that frustration also affects us as the manufacturer and supplier.
We are constantly working towards a quicker turnaround time for CVDS orders.
Elantrikbits-Croucher Engineering CVDS product is a custom built, well proven, high quality niche automotive product which takes considerable time and effort to manufacture, so please, all we ask is that you give us some breathing space when required, we try our best to supply on time.
elantrikbits – Australia
Croucher Engineering.
Please Use The Form To Contact Us – We will reply as soon as we can.
[contact-form to=’coljan@colcroucher.com’ subject=’CVDS Help Desk?’][contact-field label=’email’ type=’email’ required=’1’/][contact-field label=’Your Name’ type=’text’/][contact-field label=’Type Here:’ type=’textarea’/][/contact-form]